Culbac Logo Transparent

Forage Product Application Rate

Back to top

Culbac Hay Dry

Culbac® Hay Dry is a finely-granulated crop preservation aid which can be applied at either the cutter or baler using a metering device. One pound of Culbac® Hay Dry treats 2.5 tons of hay ranging from 16 – 22% moisture. See table below for precise moisture recommendations.

Culbac Hay Dry has been shown to:

  • Inhibit mold growth
  • Allow baling at higher moisture to reduce the number of days between cutting and baling
  • Maximize nutrient content (protein) of hay by reducing excessive leaf shatter
  • Increase palatability of the hay
  • Reduce the risk of crop damage with shorter curing time
  • Enhance re-growth of the hay plant by removing the windrow sooner
Back to top

Culbac Hay Liquid

Culbac® Hay Liquid is a concentrated forage treatment which needs to be diluted with water and then sprayed onto the hay at either the cutter or baler. Culbac® Hay Liquid should be applied to hay at the rate of 2.6 fluid ounces per ton of hay ranging from 16 – 22% moisture. See table below for moisture recommendation.

Culbac Hay Liquid has been shown to:

  • Inhibit mold growth
  • Allow baling at higher moisture to reduce the number of days between
  • cutting and baling
  • Maximize nutrient content (protein) of hay by reducing excessive leaf
  • shatter
  • Increase palatability of the hay
  • Reduce the risk of crop damage with shorter curing time
  • Enhance re-growth of the hay plant by removing the windrow sooner

Application Level

Apply 2.6 fl. Oz. of Culbac Hay Liquid per ton of hay ranging from 16% to 22% moisture

Back to top

Culbac Forage Liquid

Culbac® Forage Liquid is a multipurpose product for hay and silage that is approved for use by many regional, state and local organic certification agencies. Culbac® Forage Liquid be applied to hay at the rate of 2.6 fluid ounces per ton of hay and 1.3 fluid ounce per ton of silage. See table below for moisture recommendations on hay.

Culbac Forage has been shown to:

  • Inhibit mold growth
  • Allow baling at higher moisture to reduce the number of days between
  • cutting and baling
  • Maximize nutrient content (protein) of hay by reducing excessive leaf
  • shatter
  • Increase palatability of the hay
  • Reduce the risk of crop damage with shorter curing time
  • Enhance re-growth of the hay plant by removing the windrow sooner

Application Level

Apply 2.56 fl. Oz. of Culbac Forage per ton of hay ranging from 16% to 22% moisture

Back to top

Culbac Silage Dry

Culbac® Silage Dry is a finely-granulated preservation aid for fermented forages and high-moisture grains. Using a metering device, it should be applied uniformly at the cutter, blower or pile at the rate of one pound of Culbac® Silage Dry per 5 tons of silage. For high-moisture grain, apply one pound of Culbac® Silage Dry to 2.5 – 5 tons of high-moisture grain.

Culbac Silage has been shown to:

  • Inhibit mold growth
  • Stimulate the growth of indigenous lactic-acid producing bacteria
  • already on the crop
  • Rapidly reduce pH level through enhanced anaerobic fermentation for
  • ensiled crops
  • Decrease heat damage caused by aerobic bacterial activity in silage
  • Increase palatability of the silage
  • Protect the nutritional quality of the silage
Back to top

Culbac Silage Liquid

Culbac® Silage Liquid is a concentrated silage treatment which needs to be diluted with water and then sprayed onto silage at the cutter, blower or pile. Culbac® Silage Liquid should be applied to silage at the rate of 1.3 fluid ounces per ton of silage. For high-moisture grain, apply 1.3 – 2.6 fluid ounces of Culbac® Silage Liquid per ton of high-moisture grain.

Culbac Silage Liquid has been shown to help:

  • Inhibit mold growth
  • Stimulate the growth of indigenous lactic-acid producing bacteria
  • already on the crop
  • Rapidly reduce pH level through enhanced anaerobic fermentation for
  • ensiled crops
  • Decrease heat damage caused by aerobic bacterial activity in silage
  • Increase palatability of the silage
  • Protects the nutritional quality of the silage
Back to top

ForageEzy + Molasses

Culbac® ForagEZY + Molasses is a finely-granulated multipurpose preservation aid for hay and silages. It is available exclusively in Japan. One kilogram of Culbac® ForagEZY + Molasses treats 3 metric tons of fresh cut forage.

ForagEzy has been shown to help:

  • Inhibit mold growth
  • Allows baling at higher moisture to reduce the number of days between
  • cutting and baling
  • Maximized nutrient content (protein) of hay by reducing excessive leaf
  • shatter
  • Increased palatability of the hay
  • Reduces the risk of crop damage with shorter curing time
  • Enhances re-growth of the hay plant by removing the windrow sooner

TransAgra | 101 Gilbert Street | Storm Lake, Iowa 50588 | 800-238-6075

Google-Translate-Google-Translate-Chinese (Simplified) Google-Translate-English to ItalianGoogle-Translate-English to Japanese Google-Translate-English to Korean Google-Translate-English to Spanish
Microbial fermentation products for agriculture© 2017 Transagra International Inc., All Rights Reserved.
 website created and built by M StreetTransagra International Inc.'s website created and built by
M Street, Website Design Agency Lancaster PA